248 Appendix A Command Reference
CPTX:ROOR
Specifies number of KSVs supported by device
Class HDCP Compliance
Description Specifies whether a repeater device under test outputs content to the downstream
repeater that does not have any downstream devices connected. This is one of the
Product Capabilities Parameters (PCP).
1 = yes; 0 = no.
Command syntax CPTX:ROOR roor
roor
0 = No the repeater does not output conent to a repeater that does not have
downstream devices connected
1 = Yes the repeater does output conent to a repeater that does not have downstream
devices connected
Query syntax CPTX:ROOR?
Query response 0 or 1
Example 1
CPTX:ROOR 0 // Specifies that the repeater does not output content to
a downstream repeater
Example 2
CPTX:ROOR? // Queries to determine if the repeater device outputs
content to downstream repeater.
To Next Page
Loading...
