332 Appendix A Command Reference
EXCX
Extended-From-Content Aperture Map
Class Format parameter setting - active video
Description Maps CXAR-shaped image content into the extended EXAR-shaped aperture.
Command syntax EXCX code
code
0 to 131071 (in decimal)
The mapping code is made up of three binary field codes as follows:
• Bits 0-2 are the Squeeze/Stretch (“S”) field code
• Bits 3-9 are the Letterbox/Pillar (“L”) field code
• Bits 10-16 are the Safe Area (“K”) field code
To determine the proper mapping code, follow these steps:
1. Using the table below, determine the proper “S” field code for bits 0-2.
Squeeze/Stretch Method
“S” Field Code
Symbol
Undo Non-Linear Squeeze
Bit 2 Bit 1 Bit 0
Disabled (scaling is uniform) 0 0 0
Linear Squeeze (anamorphise) 0 0 1 S
To Next Page
Loading...
