882 Video Test Instrument User Guide (Rev A.35) 67
ISHL Newshift //Loads the values from the imageshift file named
//Newshift
ISHG 1 //Initiates (gates on) the imageshift function
ISHU //Applies the values to the hardware
5. Apply the imageshift file to the hardware using the ISHU command. For example:
ISHU //applies the imageshift file to the hardware
To stop the ImageShift utility through the command line interface:
1. To stop the Imageshift enter the following command.
ISHG 0 //Stops (gates off) the imageshift function
To Next Page
Loading...
