882 Video Test Instrument User Guide (Rev A.35) 443
MUTE
Audio/Video Mute
Class Parameters (Audio Signal and Timing)
Description Enables and disables the HDMI Audio/Video Mute (AVMUTE) feature. When enabled,
audio and video are muted by the generator.
Command syntax MUTE flag
flag
0 = disable (AVMUTE_clear_flag sent repeatedly)
1 = enable (AVMUTE_set_flag sent repeatedly)
Query syntax MUTE?
Query response 0 or 1
Example To enable AVMUTE:
MUTE 1
MUTE?
Use the MUTE? to continuously check until the AVMUTE state is changed (may not take
place right away).
To Next Page
Loading...
