- 14 -
• Do not load the pan with concentrated force:
• Avoid side loading, in particular side shocks:
13.1. Taring
To determine net weight, put the packaging on the weighing pan. On
stabilizing, press
key (indication changes to zero, Net pictogram is
displayed in the left upper corner):
On loading the weighing pan net weight is displayed. You can tare repeatedly
within the whole measuring range. While using tare function remember not to
exceed the maximum measuring range of the balance. On unloading the
weighing pan, the sum of tared masses with minus sing is displayed.
Caution:
Taring cannot be performed when the displayed value is negative or equal
zero. In such case message <Err3> is displayed and short signal is emitted.
To Next Page
Loading...
Need help?
General
