RADWAG WTC series User Manual

- 12 -
4.1. FFun
ALL, Funi, PcS, HiLo, AtAr,
PrcA, Prcb, toP, Add,
AnLS, tArE
Selection of modes quantity
available for the user
4.2. Funi YES, no <Funi> mode accessibility
4.3. PCS YES, no <PcS> mode accessibility
4.4. HiLo YES, no < HiLo> mode accessibility
4.5. PrcA YES, no < PrcA> mode accessibility
4.6. Prcb YES, no < Prcb> mode accessibility
4.7. AtAr YES, no < AtAr> mode accessibility
4.8. toP YES, no < toP > mode accessibility
4.9. Add YES, no < Add> mode accessibility
4.A. AnLS YES, no <AnLS> mode accessibility
4.b. tArE YES, no <tArE> mode accessibility
P5. Misc Miscellaneous
5.1. bL no, YES, Auto
Backlight for power supply from
mains
5.2. bLbA
no, 10, 20, 30, 40, 50, 60,
70, 80, 90, 100
Backlight for power supply from
battery
5.3. bEEP YES, no Key sound
5.4. t1 no, YES, Auto Time-defined finish mode
5.5. CHr6 YES, no Battery charging function
P6. CAL Adjustment
6.1. St_u - Start mass determination
6.2. uCAL - Adjustment process
12. OPERATING BALANCE MENU
Use keypad to navigate in menu.
12.1. Keypad
+
Press to enter 'Main Menu'
+
Press to enter tare value manually
Press to edit parameter value and to change it by 1 digit up
Press to move the menu up
+
Press to check battery status
+
Press to switch between gross / net value
Press to swap between particular menu/submenu parameter
Press to change current parameter value

RADWAG WTC series Specifications

General

Brand	RADWAG
Model	WTC series
Category	Scales
Language	English