RADWAG WTC series User Manual

- 45 -
• The following messages are displayed:
• On completion of start mass determination, the balance returns to
displaying name of the parameter:
• Start mass determination can be aborted at any moment. To do that,
press
key. The following message is displayed:
Caution:
If start mass determination takes more than 15 seconds then <Err8> error
message is displayed and short sound signal is emitted. Press
key and
carry out adjustment procedure again. Remember to maintain stable ambient
conditions!
• Return to the weighing mode saving introduced modifications.
19. COOPERATION WITH PRINTER
Press key to send current mass value with mass units to the printer.
Depending on STAB parameter setting, you can print current or stable value.
Depending on REPL parameter setting, printout can be automatic or manual.
The following printer can cooperate with the balance:

RADWAG WTC series Specifications

General

Brand	RADWAG
Model	WTC series
Category	Scales
Language	English