RADWAG WTC series

- 31 -
Caution:
To make other modes available follow the abovementioned procedure.
• Return to the weighing mode saving introduced modifications.
17.3. Selection of Modes Quantity Available For the User
Function enables selecting whether on pressing key will be available all
modes (option <ALL>) or just one selected and used by an operator.
Procedure:
• Enter <P4.Func> submenu.
• Return to the weighing mode saving introduced modifications.
17.4. Counting Parts of the Same Mass
Standard balance is equipped with option of counting parts of the same mass.
When you use a container to carry out parts counting, first tare it.