RADWAG WTC series

- 36 -
• Press and keys to enter reference mass value,
where:
- selecting the digit, - selecting digit's value,
• Press
key to confirm.
• Display indicates 0,000% value,
• Difference between values of loaded mass and reference mass is
displayed in [%].
Function disabling:
Press
key twice.
17.7. Autotare
Autotare enables quick net weight determination of weighed objects when tare
value is different for next loads. When autotare is enabled, operation is as
follows:
• For empty weighing pan press zeroing key,
• Load the weighing pan with the packaging,
• On indication stabilization, packaging mass is automatically tared (Net
pictogram is displayed in the upper part of the display),
• Insert object into packaging,
• Object net weight is displayed,
• Unload the weighing pan (object and packaging),
• Indication zeroes,
• Load the weighing pan with another object, on indication stabilization,
packaging mass is automatically tared (Net pictogram is displayed in the
upper part of the display),
• Insert next object into packaging.
Function disabling:
Press
key twice.