RADWAG WTC series

- 22 -
• On external request - see description in point: COMMUNICATION
PROTOCOL.
The indication can be sent by serial port to peripheral device in one of the
following ways:
• stable - information is send on indication stabilization
• unstable – on pressing
key the indication is send to peripheral
device and „?” pictogram is printed on a printout before weighing result.
15.1. Printout type
Parameter enables selecting printout type.
Procedure:
• Enter <P2.Prnt> submenu.
Pr_n noStAb
- Unstable weighing results printout.
Function unavailable for non-verified balances.
Pr_n StAb
- Stable weighing results printout.
Pr_n rEPL
- Automatic operation
Pr_n CntA
- Continuous transmission in basic unit.
Pr_n Cntb
- Continuous transmission in current unit.
• Return to the weighing mode saving introduced modifications.