- 28 -
Procedure:
• Enter <P5.Misc> submenu.
• Return to the weighing mode saving introduced modifications.
16.4. Battery Charging
Option allows to enable or disable batteries charging.
a) <5.5.CHr6> parameter set to <no> value:
•
pictogram is not displayed, charging disabled.
• Message <bAtt> is displayed on switching on the balance.
b) <5.5.CHr6> parameter set to <YES> value:
•
pictogram blinks slowly during charging (2s interval), charging
enabled.
• Message <nImh> is displayed on balance turning on.
• When there is no battery (batteries) or the battery is broken
pictogram blinks quickly 0.5s interval).
To Next Page
Loading...
Need help?
General
