- 21 -
Fnnd no - median filter disabled
Fnnd YES - median filter enabled
• Return to the weighing mode saving introduced modifications.
15. RS 232 SETTINGS
External devices connected to RS 232C have to be supplied from the same
mains with common electric shock protection. It prevents from appearing
potential difference between neutral conductors of the two devices. This notice
does not apply to the devices that do not use neutral conductors.
Transmission parameters:
• Baud rate - 2400 - 38400 bit/s
• Data bits - 7, 8
• Stop bits - 1, 2
• Parity - no, even, odd
The indication can be sent by serial port to peripheral device in one of the
following ways:
• Manually - on pressing
, key,
• Automatically - on indication stabilization,
• Continuously- on function activation or on sending control command,
To Next Page
Loading...
Need help?
General
