RADWAG WTC series User Manual

- 10 -
7.2. Cleaning stainless steel components
Avoid using cleansers containing any corrosive chemicals, e.g. bleach
(containing chlorine). Do not use products containing abrasive substances.
Always remove the dirt using microfiber cloth to avoid damage of protective
coating.
In case of a daily maintenance:
1. Remove the dirt using cloth dipped in warm water.
2. For best results, add a little dishwashing detergent.
8. TEMPERATURE STABILIZATION
• For correct operation of the balance the temperature has to range +15°C ÷
+30°C;
• On switching on, the balance requires 30 minutes of temperature
stabilization time;
• During temperature stabilization displayed information may change;
• Adjustment has to be carried out after temperature stabilization;
• Any changes of temperature and humidity during operation can cause
indications errors. Errors can be corrected by carrying out user
adjustment.
9. KEYPAD
WTC 600 series keypad

RADWAG WTC series Specifications

General

Brand	RADWAG
Model	WTC series
Category	Scales
Language	English