- 40 -
• Press key to confirm. The following window is displayed:
• Load the weighing pan with an animal,
• On exceeding set value of -LO- parameter, animal weighing starts. < - - - -
- - -> pictogram signalling process progress is displayed.
• On process completion mass value of an animal is snapped and displayed
together with OK pictogram in the upper part of the display.
• Press key to restart animal weighing.
• On process completion and unloading the weighing platform, the following
window is displayed:
Function disabling:
Press
key.
To Next Page
Loading...
Need help?
General
