Radwin 5000

RADWIN5000ConfigurationGuide Release4.9.17 4‐44
Operations ManagingtheSector
SetthevariousQualityofServiceparametershere(includingVoIP,ifneeded),and
clickOK.QoSparametersaredescribedin Chapter10,QualityofService.
4.2.13Operations
ThissectionappliestobothHBSsandHSUs.
TheHSUsreceivetheirservicecharacteristicsinaccordancewiththedefinitionof
theServiceCategory(here)andtheServiceCategorytowhichtheywereassigned
basedonthefilesintheRADIUSserver.
However,ifyoumanuallychangeanyoftheseparameters(viaUpdateServiceor
Configure‐>EthernetfromtheHSU’sright‐clickmenu),thenewvaluesyouhave
setwillremain,eventhoughtheydonotcorrespondtothoseinanydefined
ServiceCategory.
IfyouchangetheassignedServiceCategoryofsuchanHSU(usingthefilesinthe
RADIUSserver),thenthenexttimetheHBSreceivesupdatedinformationfrom
theRADIUSserver,itwillchangetheseparameterstocorre spondtothoseofthe
newServiceCategory.