Radwin 5000

RADWIN5000ConfigurationGuide Release4.9.17 9‐6
VLANConfigurationUsingtheRADWINManager VLANFunctionality
9.5VLANConfigurationUsingtheRADWIN
Manager
9.5.1ManagementTrafficandEthernetServiceSeparation
YoucandefineaVLANIDformanagementtrafficseparation.Youshouldconfigurethesystem
topreventconflictsasdetailedbelow.
Whenconfiguredforthedefaultoperationalmode,a“Providerport”willhandle ingress
trafficasfollows:
• FiltersframesthatarenottaggedwiththeProviderVLANID
• RemovestheProviderdoubletag
Therefore,ifaportisconfiguredformanagementtrafficseparationbyVLANandas‘Provider
port’,thenthereceivedmanagementframesmustbedoubletaggedasfollows:
• TheoutertaghastobetheProvider’stag(sotheframeisnotfiltered)
• TheinternaltaghastobemanagementVLANID
Toavoidmix‐ups,bestpracticeisto:
Untagall
PortconfiguredtountaguserVLADtagsforallframes.
Filter
IfyouarenotaVLANexpert,pleasebeawarethatincorrectVLAN
configurationmaycausehavoconyournetwork.Thefacilitiesdescribed
belowareoffer edasaservicetoenableyoutogetbestvaluefromyour
RADWIN5000HPMPlinksandareprovided“asis”.Underno
circumstancesdoesRADWINacceptresponsibilityfornetworksystemor
financialdamagesarisingfromincorrectuseoftheseVLANfacilities.
Table9‐2:Portsettings‐Egressdirection(Continued)