Radwin 5000

RADWIN5000ConfigurationGuide Release4.9.17 4‐3
AirInterface ManagingtheSector
4.2.3AirInterface
SectorID:SettheSectorIDhere.Thevaluewill“percolate”toallregisteredHSUs.Itwillof
course,be“pickedup”bynewlyinstalledandregisteredHSUs.
OperatingChannel:Youcanchangetheoperatingchannel(onlytothosechannelsforwhich
thereishardwaresupport)ifAutomaticChannelSelectionisnotenabl
ed.Inorder
forthenewchanneltotakeeffectyoumuchdeactivatethenreactivatetheHBS.
ChannelBandwidth:YoucanchoosethechannelbandwidthevenifAutomaticChannel
Selectionisenabled.Thechangeswillbesector‐wide,andaffectwhichRSS
Thresholdpowerlevelsareavailable.
AutomaticChannelSelection:Allowsyo
utosystemtochoosethechannelautomatically.We
recommendyoudothisonlyatconfigurationtime.
WiMaxCoexistenceParameters:Thisoption(notshownhere)allowsyoutoconfigurethe
HBSsothatneighboringWiMaxequipmentwillnotinterfere.Itisonlyapplicablefor