Radwin 5000 - Bulk Software Backup; Configuration Restore

RADWIN5000ConfigurationGuide Release4.9.17 8‐2
BulkSoftwareBackup Backup,Restore,andUpgrade
• Thefileincludesallsystemandsoftwareinformation,andisusedtocarryoutboth
aConfigurationRestore,andaFullRestore.
8.3BulkSoftwareBackup
Youcanbackupthesectorsoftware(only)usingtheHBSmainbuttonmenu.
TheBulkBackuptabopensthefollowingwindowoftheSoftwareUpgradeUtility:
Figure8‐1:BulkBackupsetupwindow
Themethodofselection,additionorremovalofitemsfollowsthesamepatternasinSWU
selection,Figure 8‐2.
Saveconfigurationproducesatextfileintheformatforupgradinganinstalledsector,asin
theexampleonpage 8‐7.
8.4ConfigurationRestore
Aconfigurationrestoreincludesonlycertainconfigurationparameters(asshowninStep6.
below).Itdoesnotrestorethesystemsoftware.
• HBS:AconfigurationrestorecanbecarriedoutoneitherthesameHBSunit,oradiffer‐
entHBSunit,evenifthehardwareversionisdifferent.