Radwin 5000

RADWIN5000ConfigurationGuide Release4.9.17 4‐63
UpdatingHSUServices ManagingtheSector
4.6UpdatingHSUServices
ChoosingUpdateServicesfromanHSUcontextmenuorclickingfromtheHSUbutton
baropenstheRegistrationwindow.YoumayusethistoswitchtheHSUbetweenSpatial
Multiplexing,DiversityandAutomode.YoumayalsochangetheHSUresourcetype(CIRvs.
BE).
4.7SuspendinganHSU
Youmaybreakthelink(causeasyncloss)toanun‐registeredHSUforafixedamountoftime.
Hereisthescenario:
HSU10.104.50.1isnotregistered.
 Tosuspendanun‐registeredHSU:
1. ClickSuspendinitscontextmenu.Youarerequestedtoenterasuspendduration.
TheIPaddressofthereplacementunitisnotchanged.Toensurethatall
10.104.50.1trafficactuallygetstothenewunit(inourexample),you
shouldalsochangeitsIPaddresstothatoftheoriginalunit,10.104.50.1.
IfRADIUSisenabled,makesureyousetthe RegisterAvailability 
parameterto0intheUsersfileontheRADIUSserver.