Radwin 5000 User Manual

RADWIN5000ConfigurationGuide Release4.9.17 3‐28
DeactivatingtheHBS InstallingaSector
2. IntheAddDeviceswindow,clicktheAddspinwheelbuttonsandtheResources
spin‐wheelsasshown.
3. ClicktheRegisterbuttontoregistertheHSUs.OneHSUcanonlyhaveonelevel.
Shownaboveisconfigurationinformationfor4HSUs.ANomadicHSUcanonlyhave
theCIRresourcetype‐itcannothavetheBEtype.
4. YoumayusethebottomdialogtosaveoruploadasavedHBSconfiguration.
5. ExittheConfigurationdialog.
3.11DeactivatingtheHBS
FromtheHBSbuttonbar,clicktherighthandbuttonfollowedbyDeactivate.

Radwin 5000 Specifications

General

Channel Bandwidth	5 MHz, 10 MHz, 20 MHz, 40 MHz
Encryption	AES
Product Type	Point-to-Point
Interface	Ethernet
Frequency Bands	5.1 GHz, 5.4 GHz, 5.8 GHz
Modulation	Adaptive Modulation (QPSK to 256QAM)