Radwin 5000

RADWIN5000ConfigurationGuide Release4.9.17 6‐4
AirInterface DirectHSUConfiguration
TheRefreshbuttonrestoresthecurrentwindowtoitspreviousstateabandoninganychanges
youmade,providedthatyoudidnotclickApplyorOK.
TheconfigurationtabsheredifferfromtheHSUconfigurationtabsundertheHBSTableview
inonerespect:ThereisanAirInterfacetab,whichvariesinfunctionality,dependingon
whethertheHSUisregisteredornot.
6.2.2AirInterface
Figure6‐4:HSUConfig.‐AirInterfaceforRegisteredfixedHSU
YoucanseeherethattheChannelBandwidthshowsAuto(20/40).Thatindicatesthat
DynamicBandwidthselectionisactivated.
ForaregisteredHSUthiswindowisforinformationonly.Foranunregisteredor
unsynchronizedfixedHSU,theSectorIDfieldwillbeblankorthelastSectorIDusedand
editableandtheChannelBandwidthfieldwillbesettodefaultandactive: