Radwin 5000 - Chapter 13: Using the Web Interface; Scope of this Chapter; Who Needs It; How It Works

RADWIN5000ConfigurationGuide Release4.9.17 13‐1
Chapter13:UsingtheWeb
Interface
13.1ScopeofThisChapter
ThischapterdescribeshowtoworkwiththeWebInterface,aweb‐basedapplicationthat
enablesyoutocarryoutbasicsectormanagementfunctionsusingaWebbrowser.
TheWebInterfacedescribedhereisthatoftheHBSandlegacyHSUs.TheWebInterfaceof
theSUPRO/AIRisdifferent,andisdescribedin Chapter5,SUPRO/AIRConfiguration.
13.2WhoNeedsit
TheWIisatoolfortechniciansto“quick‐install”aHSUinalinkwithminimumeffort.
Itmayalsobeemployedbyauserforaquicklookatcurrentoperatingparametersandthe
RecentEventslogs.
13.3HowitWorks
Onthemanagingcomputer,pointyourbrowsertotheIPaddressoftheradiounitwithwhich
youwanttowork(defaultIPaddress:http://10.0.0.120)andlogonasshownbelow.Youcan
alsologonovertheairtoregisteredHSUsinthesameway.
Forstand‐aloneorunregisteredHSUs,youmustconnectamanagingcomputerdirectlytothe
HSUandagainlogonasshownbelow(seeLoggingononpage 13‐3).
TheWIisadevelopingtechnology.Itispossiblethatthecurrentdistributed
releasemayhaveadditional orslightlydifferentfeaturesfromthoseshownhere.
Thedescriptionbelow,shouldneverthelessgiveyouagoodideaofhowtouse
theWI.