Radwin 5000

RADWIN5000ConfigurationGuide Release4.9.17 3‐3
Workflow InstallingaSector
3.4Workflow
Inthischapter,weassumethatyouarefamiliarwiththegraphicaluserinterfacedescribedin
Chapter2,includingGeographiclocation.
Preparethefollowinglistofparametersforeachradiounit:
Inaddition,preparetheseparametersforeachsector:
3.5TheInitialRADWINManagerMain
Window
Hereistheinitialmaindisplay:
Table3‐1:RadioUnitParameters
Parameter Remark
IP
Address
NetMask(ifusingIPv4)
SubnetPrefixLength(ifusingIPv6)
DefaultGateway
Protocol CanbesettoSNMPv3orbothv1and
Contact Optional
Name LocationofContact‐optional
UnitSerialNumber
Latitude
Longitude
Table3‐2:Sector‐WideParameters
Parameter Remark
SectorID InheritedbyallcommunicatingfixedHSUs
NetworkID InheritedbyallcommunicatingnomadicHSUs.
Band InheritedbyallcommunicatingHSUs
ChannelBandwidth Inherited byallcommunicatingHSUs