Radwin 5000

RADWIN5000ConfigurationGuide Release4.9.17 2‐6
Log‐onErrorsandCautions RADWINManagerOverview
Thefollowingtablesummarizestheseoptions:
TheNetworkManagershouldchangethedefaultpasswordsassoonaspossible,particularly
ifSNMPv3istobeused.
 Continuingthelog‐onprocedure:
4. IfyourUserTypeisnotOperator,thenchooseitnow.
5. Enterthepassword.
6. IfyouareauserwithRead‐Writepermission,clickOptionstoentertheCommunity
optionsifrequired.
2.5Log‐onErrorsandCautions
2.5.1UnsupportedDevice
AttemptingtoconnecttoanunsupporteddeviceonanotherwisevalidIPaddress(for
example,aLANprinter)willresultinthefollowingerrormessage:
Figure2‐7:Unsupporteddevicemessage
Table2‐2:Usertypes,defaultpasswordsandfunction
UserType
Default
Pass‐
word
Function
SNMPv1 SNMPv3
Community
Community
String
Password
Default
Value
Observer admin Monitoring Read‐Only public Read‐Only public
Operator admin
Installation,
configuration
Read‐Write netman Rea d‐Write netman
Installer wireless
Operatorplus
set‐band
Read‐Write netman Rea d‐Write netman
• LeavethedefaultCommunitypasswords,netmanforread‐write,
andpublicforread‐only.
• Ifyouareauserwithread‐onlypermission,thenyoumayonlylog
onasObserver.