Radwin 5000 - Page 16

RADWIN5000ConfigurationGuide Release4.9.17 2‐5
TheRADWINManagerLog‐onConcept RADWINManagerOverview
• AnInstallercan,inadditiontofunctioningasanOperator,alsochangetheoperating
frequencyband(orregulation).Thelatterfunctionhaslegalramifications,requiring
familiaritywithlocalregulations.
TosettheSNMPversion,usetheSettingsbuttoninFigure 2‐4.Alog‐onextensionwindow
opens:
• YoumaychoosetheSNMPver
sion,butthisisnotrequired.SNMPv1isthedefault
(butthiscanbechanged,(seeProtocolonpage 4‐12).Ifyourfirewallblocks
SNMPv3messagesandforsecurityreasonscannotbechanged,useSNMPv1.
• IfyouareusingTrapAuthentication,entertheUserandPassword.Theallocation
an
dassociationofatrapaddresswithauserisdescribedinChapter4.
• IfyouareconnectingthroughtheRNMSserverchecktheRNMSconnectbutton
andenteryourserverIPaddress.
Figure2‐6:LogonwindowshowingSNMPsettings.