EasyManua.ls Logo

Radwin 5000 - Working with Nomadic Hsus

Radwin 5000
252 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RADWIN5000ConfigurationGuide Release4.9.17 3‐2
WorkingwithNomadicHSUs InstallingaSector
3.3WorkingwithNomadicHSUs
EachnomadicHSUisallocatedtooneoffourHBSlevelslabelledA,B,CandD.Some
operatingparametersforeachlevel(suchasVLAN,MIR,QoS,resources,fixedrate,Spatial
Multiplexing /Diversityantennamode)canbedifferentforeachlevelallowingforbroad
prioritizationofservicebetweendifferenttypesofnomadicunits.Thisrequiresthateach
nomadicHSUbeassignedaleveltojoinasector.
AnomadicHSUmayonlysendandreceiveservicetrafficwhilestationary.AnomadicHSU
detectsthatitistimetoseektheanotherHBSuponsyncloss.Uponenteringandstoppingin
anewsect
or,itmaytakeseveralsecondstoestablishsyncwiththesectorHBS.
ChanginganyofVLAN,MIR,QoS,fixedrate,SpatialMultiplexing/Diversityantennamodefor
oneconfiguredHSUatagivenlevel,changesallotherHSUsatthatlevel.Ifyouaddanew
HSUtoasector(bydirectconnection)atagivenlevel,atsynctime,itwillacquiretheexisting
parametersforthatlevel.
Register AssoonastheHSUsareconfiguredtoyoursatisfaction,youmust
registerthemontheHBS.RegistrationofanHSUenablesservice
trafficbetweentheHSUandtheHBS.TheHBSkeepstrackof
registeredHSUsbymaintainingatableoftheirMACaddresses.
RegisteredfixedHSUssetaninternalflagsothattheycannotregister
simultaneouslytomorethanoneHBS.
AlthoughyouconfigureanSUPRO/AIRfromitsWebInterface,you
mustregisteritusingtheRADWINManager.
ResourceType Duringtheregistrationprocess,youdeterminetheresourcetypefor
eachHSU
a
.ThiscanbeBestEffort(BE),wheretrafficispassed
accordingtoavailablebandwidth,orCommittedInformationRate
(CIR),whereaguaranteedbandwidthisallottedtotheHSU.
MIR ForeachregisteredHSU,youcansetseparately,theuplinkand
downlinkMaximumInformationRate(MIR)inMbpsorleaveitas
Unlimited.
Connection
Table
YoumayalsomanageanHSUConnectiontabletoenableanddisable
connectivitybetweenHSUsinasector.
Nomadic HSUsmaybefixedornomadic.Thelattermaybemovearoundwithin
andacrosssectors.
Disable TodisableanHSUyoumustderegisterit.(Asuspendmechanismis
alsoavailable,tosuspendserviceonanHSUforalimitedperiod.)
a. UnlesstheHSUisanSUAirmodel,whichcanonlyuseBEresourcetype.

Table of Contents