Radwin 5000 User Manual

RADWIN5000ConfigurationGuide Release4.9.17 6‐3
ConfigurationMenuButtons DirectHSUConfiguration
Figure6‐3:Directconnectiontoastand‐aloneHSUoutofthebox
Inwhatfollows,weconfigurearegisteredHSUunlessspecificallyspecifiedotherwise.
6.2.1ConfigurationMenuButtons
TheBackupandRestorebuttonshavethesamefunctionalityasthecorrespondingbuttons
fortheHBS.TheyprovideforbackupandrestoreoftheHSUsoftware.
TheBuzzerbuttonmaysetormutethebuzzer.
RecallthatthebuzzertoneisprimarilyusedforHSUantennaalignment.
Abackup(fullorconfiguration)mayberestoredtoanotherHSUprovided
thattheproductIDs,revisionlevelsandcapacityofthesourceandtar get
HSUsareidentical.TheyareshownintheHSUInventorywindow.

Radwin 5000 Specifications

General

Channel Bandwidth	5 MHz, 10 MHz, 20 MHz, 40 MHz
Encryption	AES
Product Type	Point-to-Point
Interface	Ethernet
Frequency Bands	5.1 GHz, 5.4 GHz, 5.8 GHz
Modulation	Adaptive Modulation (QPSK to 256QAM)