Radwin 5000

RADWIN5000ConfigurationGuide Release4.9.17 8‐3
ConfigurationRestore Backup,Restore,andUpgrade
• HSU:AconfigurationrestorecanbecarriedoutoneitherthesameHSUunit,oradiffer‐
entHSUunit,butthehardwareversionmustbethesame.
• HBSandHSU:Ifyouchangeoneunitforadifferentunitwhosepartnumberandhard‐
wareversionarethesame,youcanonlydoaFullRestoreontheunit;youcannotdoa
ConfigurationRestoreonly.
3. MakesuretheHBS/HSUisdeactivatedbeforestartingaConfigurationRestore.
4. OpentheRADWINManager,andfromtheHBS/HSU,opentheConfiguration
window,thenclicktheRestorebutton:
5. Fromthetwooptionsthatappear,clickConfigurationRestore:
6. ChoosethefileyousavedinStep1.ofSystemBackup,andclickOpen.Awarning
messagemightappearstatingthatthecurrentconfigurationsettingsmaybelost.
Ifthisisacceptable,clickYes.
DoNOTactivate theunitatthispoint.