Radwin 5000 User Manual

RADWIN5000ConfigurationGuide Release4.9.17 9‐9
ConfigurationofVLANTaggingforEthernetService VLANFunctionality
3. EnteraProviderVLANIDandPriority.TheVLANIDmustbeintherange2to4094.
TheVLANPrioritymustbeintherange0to7.YoumayalsochangetheTPIDfrom
thedefaultasshown.
4. ClickOKtoaccept.
5. ForuserVLANtagging,clicktheTagRadiobutton:
InTagmodeEthernetframesaretaggedoruntaggedtodistinguishbetweendiffer‐
entnetworks.
6. Forcompletelytransparentpassageoftaggedframes,thereisnothingfurtherto
do.ThefollowingtableshowsthepossiblesettingsforeachcombinationofIngress
andEgressmodes:
Thisfacilityisprovidedtoenableconnectionthroughlegacyswitches
requiringit.Otherwise,thereisnoneedtochangetheTPID.

Radwin 5000 Specifications

General

Channel Bandwidth	5 MHz, 10 MHz, 20 MHz, 40 MHz
Encryption	AES
Product Type	Point-to-Point
Interface	Ethernet
Frequency Bands	5.1 GHz, 5.4 GHz, 5.8 GHz
Modulation	Adaptive Modulation (QPSK to 256QAM)