Radwin 5000 User Manual

RADWIN5000ConfigurationGuide Release4.9.17 2‐35
Advanced RADWINManagerOverview
EnableTx/RxExtendedView
Notrelevantforthisproduct.
EnableUnicodeintextfields
Checkingthisboxallowsyoutotypeunicodecharactersintextfields.Wedonotrecommend
enablingthisoption.
MonitoringandTimeoutIntervals
ThemonitoringintervaldeterminesthelowestintervalbetweenrequesttotheODUfor
statusupdates.Thetimeout(default1sec,maximum5sec)mayhavetobeincreasedifyou
areonaslownetwork.
SettingtheMapViewBackgroundMode(HBSonly)
Youhaveachoiceoftwomapproviders,adefaultoraself‐chosenbackground.Ifyoulogon
withoutanInternetconnection,youwillgetadefaultgraybackgroundor,ifyouhavecaching
enabled,yourlastusedmap.

Radwin 5000 Specifications

General

Channel Bandwidth	5 MHz, 10 MHz, 20 MHz, 40 MHz
Encryption	AES
Product Type	Point-to-Point
Interface	Ethernet
Frequency Bands	5.1 GHz, 5.4 GHz, 5.8 GHz
Modulation	Adaptive Modulation (QPSK to 256QAM)