Radwin 5000 User Manual

RADWIN5000ConfigurationGuide Release4.9.17 3‐11
ActivatinganHBS InstallingaSector
AutomaticchannelselectionattheHBSmakeslittlesensebeyondconfiguration
time.Youmayleaveallorseveralofthechannelsselectedfornow.Inpractice,after
havingfullyconfiguredthesectoryouwoulddisableallbuttheactualoperating
channel.
12. ClickNext.TheAntennatypeandTxPowerwindowispresented:
ForoperationusingLicensed3.XbandsunderFCCpart90subpartZand
ICRSS‐197supporting3.650‐3.700GHz:TheHBSdoesnotcommenceany
typeoftransmissionuntiltheActivationprocessiscompleted,in
compliancewiththoseregulations.

Radwin 5000 Specifications

General

Channel Bandwidth	5 MHz, 10 MHz, 20 MHz, 40 MHz
Encryption	AES
Product Type	Point-to-Point
Interface	Ethernet
Frequency Bands	5.1 GHz, 5.4 GHz, 5.8 GHz
Modulation	Adaptive Modulation (QPSK to 256QAM)