Rational SCC Series

102
SCC
Edition 10-2008a
Common Information
Date and Time................................. : 20070907134033 =Moment of download (JJJJ/MM/TT/hh/mm/ss)
Startup Date and Time................: 20000101000000 =20000101 - unit was updated with software
: 20070801141545 = unit operated for  rst 10 hours-warranty starts
Unit type.......................................... : SCC_61
Energy type..................................... : G = Indication G(as) or E(lectric)
Unit Serial number.......................... : G61SE04061234567
Software version............................. :
„SCC-03-01-02 „ = Unit software
Script-Version.............................: Indication of chain account
Software update....................... : 20060907134033 =Date of last Updates
CPU-Board Revision....................... : 612
CPU-Board Serial number.............. :
24456703
CPU-Board Manufacturing date...... :
2007-07-30 03:19:24
Burner Control 0 SW-version.......... : „1.4.4“ = Software version of ignition box
Burner Control 1 SW-version.......... :
not supported by version (on floor models indication of the 2nd igni. box)
Language........................................ : ENGLISH OTHERS = selected language
Basic Settings (Indication of the present values of the package basic settings)
B-1.2 Drain valve time0........ :8.6 s
B-1.2 Drain valve time1........ :28.7 s
B-22 <USB> Subnet mask... :???.???.???
Diagnostic (Indication of the present values of the package diagnostic)
D-1 Cabinet B1 act........... :24.84 C
D-1 Cabinet B1 max....... :693.40 C
D-23 S12 Micro switch..... :1
Running Times (Indication of the present values of the package running times)
R-1 S3 Door openings.......... :248
R-2 S12 Ball valve openings. :91
R-19 Emergency Controller..... :3
System Logger
Last calibration.............. : 20070801173010 date and time of last manual calibration
:19700101 = not calibrated since software update
Running time since last cal... :0 hrs
Calibrations.................. :0
Last emergency run............ :19700101000000 = humidity control
Last emergency running time... :0 s
Heating request hotair......... :0
Heating request steam.......... :0
Fanmotor1 running time........ :0 hrs
Fanmotor2 running time........ :0 hrs
Flap operating cycles......... :73
Flap running time............. :15 min
State of exhaust hood......... :0