What does 'No GPS' mean on Raven SmarTrax Farm Equipment and how do I fix it?
If you are getting a 'No GPS' error on your Raven Farm Equipment, verify the GPS receiver is properly installed and configured.
What does 'Low Stats' mean on Raven Farm Equipment and how do I fix it?
If your Raven Farm Equipment is displaying 'Low Stats', it means the GPS receiver is not receiving signal from enough satellites. Wait a few minutes to see if more satellites are found.
What does 'High HDOP' mean on Raven SmarTrax Farm Equipment and how do I fix it?
If you are getting a 'High HDOP' error on your Raven Farm Equipment, it means insufficient GPS signal is being received. Wait a few minutes to see if the signal improves.
What to do if Raven Farm Equipment SmarTrax will disengage only when the steering wheel is turned one way?
If your Raven Farm Equipment SmarTrax will disengage only when the steering wheel is turned one way, replace the faulty flow disengage switch.
What does 'VALID POINTS LOW' mean on Raven SmarTrax and how can I fix it?
If you're experiencing a 'VALID POINTS LOW' error with your Raven Farm Equipment, verify that the SmarTrax hydraulic hose, fitting, and valve connections are secure and no leaks are present. Also, verify that harness cable connections are correct and securely installed and check the steering linkages to ensure they are connected securely and meet the machine manufacturer’s factory specifications.
Guidelines for working safely with the hydraulic system, including protective equipment and fluid handling.
Precautions for electrical connections, polarity, and voltage requirements for the SmarTrax system.
Best practices for installing and operating the SmarTrax system for the first time.
Details on positioning the GPS antenna for optimal system performance and accuracy.
Explains common status and mode information displayed on the CR7 during SmarTrax operation.
Steps for setting up machine profiles and configuring machine-specific settings in the CR7.
Overview of the SmarTrax calibration wizard and initial setup steps for the system.
Information on tuning system performance and adjusting parameters like Line Acquisition and Sensitivity.
Defines common status icons and buttons used on the Viper 4/4+ display for SmarTrax.
Steps to configure GPS settings and ensure proper communication for the SmarTrax system.
Process for selecting machine types and setting up profiles for SmarTrax operation on Viper 4/4+.
Detailed procedure for calibrating the SmarTrax system using the setup wizard.
Guidelines for fine-tuning SmarTrax performance, including LA and OL modes.
Requirements for Viper Pro software and SmarTrax node software versions for compatibility.
How to interpret system status messages displayed on the Viper Pro screen.
Setting up machine profiles and specific configurations for SmarTrax on Viper Pro.
Step-by-step guide to calibrating the SmarTrax system with the Viper Pro.
Tuning SmarTrax parameters like LA and OL sensitivity for optimal field operation.
Specifies required software versions for Envizio Pro/Cruizer II and SmarTrax node.
Interpreting SmarTrax system status icons on the Envizio Pro/Cruizer II display.
Steps to configure machine profiles and specific settings for SmarTrax with Envizio Pro/Cruizer II.
Guide for calibrating the SmarTrax system when used with Envizio Pro or Cruizer II.
Adjusting SmarTrax settings like LA and OL sensitivity for optimal field operation.
Explains SmarTrax CAN control node LEDs for diagnosing system issues.
Lists common SmarTrax error messages, their causes, and corrective actions.
Provides a wiring diagram for the SmarTrax 3D system with specific field computers.
General| Brand | Raven |
|---|---|
| Model | SmarTrax |
| Category | Farm Equipment |
| Language | English |
To Next Page