To Next Page

To Previous Page

RED RAVEN OPERATION GUIDE

CALIBRATION MANAGEMENT

To apply, export, and import calibration maps, go to Menu > Settings > Maintenance > Calibrate.

 In Camera: The calibration maps that are saved internally on the camera:

‒ Factory: This is the calibration map generated during the manufacturing process, and is the default

map.

‒ All other: The user-created calibration maps.

 Media: The calibration maps that are on the SSD in the path shown (for example, S-SSD\calibration).

CALIBRATION MAP ACTIONS

 Apply: Apply the selected calibration map (if the calibration map is on the SSD, the camera applies the map

temporarily, and does not import it into the camera).

 Create: Create a calibration map.

 Delete: Delete the selected camera calibration map. You cannot delete the factory map.

 Rename: Rename the selected calibration map.

EXPORT AND IMPORT CALIBRATION MAPS

NOTE: The camera cannot export calibration maps created by Auto Capture.

Calibration maps can be stored on the camera or transferred to SSD to be shared with other cameras. You can

also build a library of calibration maps to use in different settings.

 : Export selected calibration map from camera to SSD.

 All

: Export all files from camera to SSD.



: Import selected calibration map from SSD to camera. This overwrites the user HS calibration map.

 All: Import all files from SSD to camera.

Questions and Answers:

Need help?

Do you have a question about the RED Raven and is the answer not in the manual?

RED Raven Specifications

General