To Next Page

To Previous Page

RED RAVEN OPERATION GUIDE

955-0127_V6.3, REV-E | 122

EXPOSURE ASSIST

The Exposure Assist menu provides access to settings for the Auto Exposure (AE) feature. The AE feature

maintains a constant image brightness, even if the actual scene brightness changes.

The AE feature is different than traditional AE, in that RED AE only controls the amount of light that hits the

sensor, either by adjusting aperture or exposure. RED AE analyzes RAW data before the ISO curve, and ensures

that the sensor matches the user-selected brightness.

AUTO EXPOSURE MODES

The Exposure Assist modes determine when the AE tools go into effect:

 Off: The AE tools are not enabled.

 Single Shot: Map one of the following actions to trigger the AE tools:

‒ AE: Start

‒ AE/AF: Start

 Continuous in Preview: The AE tools are enabled in preview only.

 Continuous in Preview/Record: The AE tools are enabled in both preview and record.

NOTE: In Stills mode, AE/AF: Start is mapped to Record Half Press by default. For more information, go to

“Default Key Functions” on page 197.

EXPOSURE PRIORITY

 Manual: You have full control of aperture and shutter. (Default)

 Auto: The camera sets the aperture and shutter to meet the selected exposure.

 Av (Aperture Value): You set the aperture, and then the camera sets the shutter to meet the selected

exposure.

 Tv (Time Value): You set the shutter, and then the camera sets the aperture to meet the selected exposure.

Questions and Answers:

Need help?

Do you have a question about the RED Raven and is the answer not in the manual?

RED Raven Specifications

General