To Next Page

To Previous Page

RED RAVEN OPERATION GUIDE

CAMERA PRESETS

PRESETS ACTIONS

 Apply: Apply the selected preset.

 Create...: Create a new preset using the current settings.

 Update...: Update the selected preset by allowing the parameter set to be modified and all the values to

be updated to their current in-camera values. You cannot update factory-installed presets, which end with

“(RED)”.

 Clone...: Create a new preset using the selected preset as a template.

 Delete: Delete the selected preset.

EXPORT AND IMPORT PRESETS

Presets can be stored on the camera or transferred to SSD to be shared with other cameras. When exporting

presets from camera to an SSD, the presets are saved to a folder on the SSD called “Presets”. When importing

presets from an SSD to camera, the presets must be stored on the SSD in a folder called “Presets”.

 : Export selected preset from camera to SSD.

 All : Export all presets from camera to SSD.

 : Import selected preset from SSD to camera.

 All: Import all presets from SSD to camera.

CREATE PRESETS

1. Set up the camera how you want the preset to be configured.

For example, if you want to create a preset specifically for your zebra indicators, first go to Menu > Settings

> Display > Zebra and configure the zebras the exact way that you want them to be in the preset.

2. Go to Presets > Camera Presets.

3. Select Create, or select an existing preset and select Clone or Update.

4. If creating a new preset, enter a name for the preset and select OK.

5. Select the following tabs to display different sets of preset options: Display, Key, Look, Project, and System.

6. Select the following:

‒ : Add selected setting to the preset.

‒ All : Add all settings to the preset.

‒ X: Remove selected setting from the preset.

7. Select Create.

The preset is saved and stored in the camera.

LOOKS

A Look is made up of the following settings: Color, Gain, FLUT, Sharpness, Curves, Video, Color Temperature,

and LGG (Lift, Gamma, Gain). These settings are configured either in-camera (in Menu > Settings > Look) or in

REDCINE-X PRO (in the Looks panel).

CREATE AND MANAGE IN-CAMERA LOOKS

Create in-camera looks in the Menu > Presets > Camera Presets tab. Modify and manage the in-camera Looks

the same way as any other presets created in the Camera Presets tab. For more information, go to “Camera

Presets” on page 125.

RED Raven User Manual

Questions and Answers: