To Next Page

To Previous Page

RED RAVEN OPERATION GUIDE

FEATURE: EDIT LIST

Select the Edit List... button in the Upper Status Row menus to change the values that display for each setting.

For example, if you open the Frame Rate menu and select Edit List..., the camera lets you add or remove values

to available frame rates.

APERTURE

The aperture (also known as the T stop or F stop) parameter displays when a compatible lens is installed. The

aperture controls the depth of field of the image and, in combination with the shutter speed/angle setting,

controls the amount of light that reaches the sensor (exposure).

 Increasing the aperture to a higher number increases the depth of field, but reduces the exposure (brightness).

 Decreasing the aperture to a lower number decreases the depth of field, but increases the exposure

(brightness).

Select “Edit List...” ButtonSelect “Edit List...” Button

“Edit List...” Menu

Questions and Answers:

Need help?

Do you have a question about the RED Raven and is the answer not in the manual?

RED Raven Specifications

General