COPYRIGHT © 2016 RED.COM, INC
RED RAVEN OPERATION GUIDE
955-0127_V6.3, REV-E | 72
PRESETS
Each preset has 0.000 Tint. Available preset options are:
Incandescent: 2800 K
Tungsten: 3200 K
Fluorescent: 4500 K
Flash: 5500 K
Daylight: 5600 K
Cloudy: 7500 K
Shade: 9000 K
AUTO WHITE BALANCE
Auto white balance analyzes the central 25% of the image visible in the monitor to calculate a color temperature
that will render a white object as white.
To use auto white balance, follow the instructions below:
1. Place a white or grey object under the ambient light.
2. Go to Menu > Settings > Look > Color Temp.
Alternatively, select Color Temperature > Advanced... from the Upper Status Row.
3. Select Auto White Balance.
LGG (LIFT, GAMMA, GAIN)
Adjust the lift, gamma, and gain for the Red channel, Blue channel, and Green channel individually.
PROJECT
The Project menu includes: Frame Rate, Exposure, Timecode, Slate, Format, and Sensor.
FRAME RATE
RECORDING FRAME RATE
Select the recording frame rate (also referred to as the capture frame rate). The recording frame rate is the
number of frames per second (fps) that are recorded. The recording frame rate is different from the project time
base, which is the rate at which the footage will be played back.
The default recording frame rate is 23.98 fps. If you change the project time base, the recording frame rate
automatically changes its value to match the project time base.
The maximum frame rate for each format is determined by several factors, including project time base and
REDCODE. For more information about the maximum REDCODE settings for each common recording frame
rate, see the DSMC Media Operation Guide, available at www.red.com/downloads.
To Next Page
Loading...
Need help?
General
