To Next Page

To Previous Page

RED RAVEN OPERATION GUIDE

MAINTENANCE

The Maintenance menu includes: Save Log, Upgrade, Calibrate, Self Test, Reset Defaults, Rediscover, System

Status, and OLPF.

SAVE A LOG FILE

A log file is a detailed text file of the processes and operations performed by the camera. If you contact RED

for support, you may be asked to send a log file.

To save a log file, follow the instructions below:

1. Ensure that a RED MINI-MAG SSD is properly mounted to the camera.

2. Go to Menu > Settings > Maintenance.

3. Select Save Log.

The log file is saved as a *.txt file in the SSD root directory.

For more information about RED support or to create a support ticket, go to https://support.red.com.

NOTE: The camera automatically saves a log file when it is turned off properly and an SSD is mounted.

UPGRADE

You can check for upgrades for the following items:

 Camera: Go to “Upgrade Camera Firmware” on page 146.

 Media: For more information on the media upgrade procedure, see the DSMC Media Operation Guide,

available at www.red.com/downloads.

Questions and Answers:

Need help?

Do you have a question about the RED Raven and is the answer not in the manual?

RED Raven Specifications

General