RL78/G13 CHAPTER 12 SERIAL ARRAY UNIT
R01UH0146EJ0100 Rev.1.00 625
Sep 22, 2011
Figure 12-66. Procedure for Stopping Slave Transmission/Reception
Remark Even after communication is stopped, the pin level is retained. To resume the operation, re-set serial
output register m (SOm) (see Figure 12-67 Procedure for Resuming Slave Transmission/Reception).
Starting setting to stop
Stopping communication
Write 1 to the STmn bit of the target
channel.
Changing setting of the SOEm register
Set the SOEmn bit to 0 and stop the
output of the target channel.
Setting the STm register
To Next Page
Loading...
Need help?
General
