SERVICE PROGRAM MODE TABLES 20 June 2005
5-50
5821* Remote Service
Address
Japan Only.
5821 1* CSS PI Device Code Sets the PI device code. After changing this setting,
you must switch the machine off and on.
5821 2* RCG IP Address Sets the IP address of the RCG (Remote
Communication Gate) destination for call processing at
the remote service center.
[00000000h ~ FFFFFFFFh/ 00000000h /
NVRAM Data Upload 5824
Uploads the UP and SP mode data (except for counters and the serial number)
from NVRAM on the control board to a flash memory card.
While using this SP mode, always keep the front cover open. This prevents a
software module accessing the NVRAM during the upload.
NVRAM Data Download 5825
Downloads the content of a flash memory card to the NVRAM on the control
board.
To Next Page
Loading...
