SERVICE PROGRAM MODE TABLES 20 June 2005
5-52
HDD Formatting 5832
Enter the SP number for the partition to initialize, then press #. When the execution
ends, cycle the machine off and on.
5832 1 HDD Formatting (All)
5832 2 HDD Formatting (IMH)
5832 3 HDD Formatting (Thumbnail)
5832 4 HDD Formatting (Job Log)
5832 5 HDD Formatting (Printer Fonts)
5832 6 HDD Formatting (User Info1)
5832 7 Mail RX Data
5832 8 Mail TX Data
5832 9 HDD Formatting (Data for Design)
5832 10 HDD Formatting (Log)
5832 11 HDD Formatting (Ridoc I/F) (for Ridoc Desk Top Binder)
e-Cabinet Enable 5833
Enables the e-Cabinet function. Then, the user names in the cabinet are enabled for
use with the POP server.
[0~1/1]
0: Disabled
1: Enabled
Operation Panel Image Exposure 0: Off (disable), 1: On (enable)
5834
Enables and disables the operation panel read (dump) feature. After powering on
the machine, set this option to 1 to enable this feature.
To reset the machine to 0, the machine must be turned off and on again. Selecting
0 for this option without cycling the power off and on does not restore the default
setting (0).
5836 Capture Setting
Capture Function (0:Off 1:On) 5836 1
With this function disabled, the settings related to the capture feature cannot be
initialized, displayed, or selected.
[0~1/1]
0: Disable
1: Enable
Panel Setting 5836 2
Determines whether each capture related setting can be selected or updated from the
initial system screen.
[0~1/1]
0: Disable
1: Enable
The setting for SP5836-001 has priority.
To Next Page
Loading...
