Ricoh A-C4 - Page 289

20 June 2005 SERVICE PROGRAM MODE TABLES
5-55
Service
Tables
Logout 5839 11
Handles the login request of the login initiator for SBP-2. (1-bit)
Bit0: Off
Bit1: On
OFF: Disable (refuse login). Initiator retry during login. Login refusal on arrival of
login request (standard operation)
ON: Enable (force logout). Initiator retry during login. Login refusal on arrival of login
request, and the initiator forces the login.
Login 5839 12
Enables or disables the exclusive login feature (SBP-2 related).
Bit0: Off
Bit1: On
OFF: Disables. The exclusive login (LOGIN ORB exclusive it) is ignored.
ON: Enables. Exclusive login is in effect.
Login MAX 5839 13
Sets the maximum number of logins from the initiator (6-bits)
[0~63/1]
0: Reserved
63: Reserved
5840 IEEE 802.11b
Channel MAX 5840 6
Sets the maximum range of the bandwidth for the wireless LAN. This bandwidth
setting varies for different countries.
[1~14/1]
Channel MIN 5840 7
Sets the minimum range of the bandwidth for operation of the wireless LAN. This
bandwidth setting varies for different countries.
[1~14/1]
WEP Key Select 5840 11
Determines how the initiator (SBP-2) handles subsequent login requests.
[0~1/1]
0: If the initiator receives another login request while logging in, the request is
refused.
1: If the initiator receives another login request while logging in, the request is
refused and the initiator logs out.
Note: Displayed only when the wireless LAN card is installed.