SERVICE PROGRAM 9 March 2004
5-32
4941*
White Line Erase [0 ~ 2 /
1
/ 1/step]
4941 1 Selects the white line erase level.
0: None 1: Weak 2: Strong
• This setting is effective only Photo 1, Photo 3, Special 3 or Special 4 mode.
•
0: White line erase is not used, and white level correction is used instead·
• This setting is applied regardless of what mode has been selected in SP4-921.
4942*
Black Line Erase [0 ~ 3 /
2
/ 1/step]
4942 1
Selects the black line erase level. This setting is effective only when originals are
scanned by the ADF.
[0 = No / 1 = Very weak / 2 = Weak / 3 = Strong]
This setting is applied regardless of what mode has been selected in SP4-921.
To Next Page
Loading...
