9 March 2004 SERVICE PROGRAM
5-31
Service
Tables
Texture Removal
4926*
Adjusts the texture removal level that is used with error diffusion. 0: The default
value for each mode is used. Text 1, Photo 2, Special 2, and Special 5 have a
default of 3 and Photo 1-3 have a default of 1.
1: No removal applied.
2 – 5: Removal applied at the level specified here. The higher the setting (level), the
less clear the image will become (more texture removal). This setting is only applied
to the originals in SP4-921.
4926 1 Copy
4926 2 Fax
4926 3 Scanner
[0 ~ 6 /
0
/ 1/step]
Line Width Correction
4927*
Adjusts the line width correction algorithm. Positive settings produce thicker lines;
negative settings produce thinner lines. This setting is only applied to the originals
in SP4-921.
4927 1 Copy
4927 2 Fax
4927 3 Scanner
[–2 ~ 2 /
0
/ 1/step]
Independent Dot Erase
4928*
Selects the dot erase level. Higher settings provide greater erasure. This setting is
only applied to the originals in SP4-921.
4928 1 Copy
4928 2 Fax
4928 3 Scanner
[–2 ~ 2 / 0 / 1/step]
4929*
Positive/Negative [
0
= No, 1 = Yes]
4929 1 Copy
4929 2 Fax
Inverts white and black. This setting is only
applied to the originals in SP4-921.
4930*
Sharpness-Edge [–2 ~ 2 /
0
/ 1/step]
4930 1 Copy
4930 2 Fax
4930 3 Scanner
Adjust the clarity. This setting is only applied to
the originals in SP4-921.
4931*
Sharpness-Solid [–2 ~ 2 /
0
/ 1/step]
4931 1 Copy
4931 2 Fax
4931 3 Scanner
Adjust the clarity. This setting is only applied to
the originals in SP4-921.
4932*
Sharpness-Low ID [–2 ~ 2 /
0
/ 1/step]
4932 1 Copy
4932 2 Fax
4932 3 Scanner
Adjust the clarity. This setting is only applied to
the originals in SP4-921.
To Next Page
Loading...
