Ricoh Aficio 1515 - Sp2-XXX (Ram)

SERVICE PROGRAM MODE 9 March 2004
3-2
SP1-XXX (BIT SW)
(☛ 3.2)
1
Mode No. Function
System Switch 101
001 – 032 00 – 1F Change the bit switches for system settings
for the fax option.
Ifax Switch 102
001 – 016 00 – 0F Change the bit switches for IFAX settings.
Printer Switch 103
001 – 016 00 – 0F Change the bit switches for printer settings
for the fax option.
Communication Switch 104
001 – 032 00 – 1F Change the bit switches for communication
settings for the fax option.
G3-1 Switch 105
001 – 016 00 – 0F Change the bit switches for the protocol
settings of the standard G3 board.
SP2-XXX (RAM)
2
Mode No. Function
RAM Read/Write 101
001 Change RAM data for the fax board directly
(
☛
3.5).
Memory Dump 102
001 G3-1 Memory Dump Print out RAM data for the fax board (☛
3.5).
G3-1 NCU Parameters 103
001 – 023 CC, 01 – 22 NCU parameter settings for the standard
G3 board (
☛
3.3).