Ricoh Aficio 1515 - Service Tables; Service Program; Starting SP Mode; Using Sp and Ssp Modes

9 March 2004 SERVICE PROGRAM
5-1
Service
Tables
5. SERVICE TABLES
5.1 SERVICE PROGRAM
!
!!
!IMPORTANT
Do not let the user access the SP mode or the SSP mode. Only service
representatives are allowed to access these modes. The machine operation
is NOT guaranteed after any person other than service representatives
accesses the SP mode or the SSP mode.
5.1.1 USING SP AND SSP MODES
The following two modes are available:
• SP Mode (Service Program Mode): The SP Mode includes the programs that
are necessary for standard maintenance work.
•
SSP Mode (Special SP Mode): The SSP Mode includes SP-Mode programs
and some special programs. You need some extra knowledge to use these
special programs. For details, consult your supervisor.
Starting SP Mode
1. Type the keys as follows: " → # → $ → %
2. Press the & key and hold it down until the SP-mode menu is displayed (about
3 seconds).
1 2 3
4 5 6
7 8 9
0 #
B130S903.WMF
[A]
[B] [C]
[D]
! "/OK
[F] [E]