9 March 2004 SERVICE PROGRAM
5-37
Service
Tables
5816*
Remote Service
Port 80 Enable 5816 11
Determines whether permission is granted for access to the SOP via Port 80
(NRS).
5821
*
Remote Service Address
Japan Only
.
5821 1* CSS PI Device Code
Sets the PI device code. After changing this setting,
you must switch the machine off and on.
5821 2* RCG IP Address
Sets the IP address of the RCG (Remote
Communication Gate) destination for call processing at
the remote service center.
[00000000h ~ FFFFFFFFh/
00000000h
/
5824
NVRAM Upload
5824 1 ☛ 5.1.9
5825
NVRAM Download
1 ☛ 5.1.9
5828
* Network Setting
Delete Password 5828 74*
Deletes the NCS (Network Control Service) password. Sets the Telnet, WSM (Web
Status Monitor), and remote ROM update passwords to NULL (empty)
Print Settings List 5828 84*
Prints a list of the NCS parameter settings.
TELNET (0: OFF 1: ON) [0 = Disabled /
1
= Enabled] 5828 90*
Disables or enables Telnet operation. If this SP is disabled the Telnet port is closed.
Web (0: OFF 1: ON) [0 = Disabled /
1
= Enabled] 5828 91*
Disables or enables the Web operation.
SMB Computer Name 5828 115*
Specifies the SMB computer name.
SMB Work Group Name 5828 116*
Specifies the SMB work group name.
SSP
5834
Panel Image [
0:
Off (disabled)/1: On (enabled)]
5834 1
Enables and disables the operation-panel image-transfer feature. Set “1” to enable
this feature. When changing the setting to “0”, turn the main power switch off and on
validate the setting.
To Next Page
Loading...
