Copying
72
2
A Press [Dup./Combine/Series].
B Make sure that [Duplex] is selected. If [Duplex] is not selected, press [Duplex].
C Select [1 Sided→2 Sided] or [2 Sided→2 Sided].
D Press [OK].
E Place the originals, and then press the {Start} key.
Note
❒ When placing originals on the exposure glass, start with the first page to
be copied. When placing originals in the ADF, set the first page on top.
❒ You can also select “1 Sided→2 Sided” or “2 Sided→2 Sided” directly by
pressing the copy function key in step
A
. In that case, proceed to step
E
.
❒ To change originals and copy orientation in step
C
, press [Orientation].
❒ When placing originals on the exposure glass or in the ADF using the
Batch function, press the {q} key after all the originals have been scanned.
Reference
p.93 “Margin Adjustment”
“Edit”, General Settings Guide
To Next Page
Loading...
