Ricoh CL4000DN Quick Installation Guide

Message Problem and solutions
(IKE phase-1) mismatched authentication type:
local=<authentication type 1>
remote=<authentication type 2>
This machine's <authentication type 1> in IKE phase
1 does not match the communicating host's
<authentication type 2>, Make sure this machine's
ISAKMP SA authentication type matches that of the
communicating host.
(IKE phase-1) mismatched encryption type:
<encryption algorithm 1> remote=<encryption
algorithm 2>
This machine's ISAKMP SA Oakley group
<encryption algorithm 1> in IKE phase 1 does not
match the communicating host's ISAKMP SA
Oakley group < encryption algorithm 2>, Make
sure this machine's ISAKMP SA Oakley group
matches that of the communicating host.
(IKE phase-1) mismatched DH group: local=<DH
group number 1> remote=<DH group number 2>
This machine's ISAKMP SA Oakley group <DH
group number 1> in IKE phase 1 does not match
the communicating host's ISAKMP SA Oakley
group <DH group number 2>, Make sure this
machine's ISAKMP SA Oakley group matches that
of the communicating host.
(IKE phase-1) mismatched hash type: local=<Hash
Algorithm 1> remote=<Hash Algorithm 2>
This machine's ISAKMP SA <Hash Algorithm 1> in
IKE phase 1 does not match the communicating
host's ISAKMP SA <Hash Algorithm 2>, Make sure
this machine's ISAKMP SA Hash Algorithm matches
that of the communicating host.
session IPv4 <community name> not defined. The requested community name is not defined.
session IPv6 <community name> not defined. The requested community name is not defined.
session_ipx <community name> not defined. The requested community name is not defined.
shutdown signal received. network service
rebooting...
The smbd service has started.
SMTPC: failed to get smtp server ip-address. The SMTP server IP address could not be obtained.
This could be because:
• The specified DNS server could not be found.
• No connection to the network has been
established.
• The specified DNS server could not be found.
• An incorrect DNS server is specified.
Message List
279
5

Ricoh CL4000DN Specifications

General

Brand	Ricoh
Model	CL4000DN
Category	Printer
Language	English